Showing all 13 results
-
Read moreBitumen emulsion C50B4
Primarily suitable for the shear resistant bonding of asphalt layers. Good coverage with small amounts and usable cold, without heating. Can also be used in applications where multiple surfacing or steeping of other materials is required. Can be used cold, without heating, or while being kept warm above +5 degrees.
-
Read moreBitumen emulsion C65B2 (B3)
Suitable primarily for surface sealing works with clean, washed rock. Due to the fast rate of degradation, the emulsion can react too quickly on dusty rock and form a bitumen layer before adhesion between the bitumen and rock. Store and use at +60-80 degrees. Do not store for over 7 days, as the emulsion’s degradation rate is very fast.
-
Read moreBitumen emulsion C65BP6
Special emulsion for microsurfacing. Contains polymers and is durable with thin film of microsurfacing mix.
We produce this product only for the specific rock material provided by the customer and only with mixdesign in our laboratory !
-
Read moreBitumen-emulsion C35B5
Suitable for the fog-seal technology or elsewhere, where the emulsion should achieve maximum absorption to pores through dust. Can sink into the smallest of pores and seal them with a bitumen film to prevent further water access. The minimal bitumen content is 28%. Can be used cold, without heating, or while being kept warm above +5 degrees.
-
Read moreBitumen-emulsion C60B2 (B3)
Primarily suitable for hole repair with manual technology and recommended with clean, washed rock. Due to the fast rate of degradation, the emulsion can react too quickly on dusty rock or holes full of fine granules and form a bitumen layer before adhesion between the bitumen and rock. Store and use at +40-60 degrees. Do not store in containers for over 7 days as the emulsion’s degradation rate is very fast.
-
Read moreBitumen-emulsion C60B4
Primarily suitable for hole repair, both manually and with any specialised machinery. Good dust permeability due to slow degradation and does not instantly react with dusty fine granules on the rock or in pavement holes. It is recommended to heat the product up to +40 degrees before use. Also usable for steeping during stabilisation work.
-
Read more
Bitumen-emulsion C67B4 (B3)
Suitable for most surface sealing works, with both single and multiple surfacing technology. Good dust permeability due to slow degradation speed and resistant to lighter rainfall already after 20-30 min of hardening. Recommended to store and use at 60-80 degrees.
-
Read morePolymer bitumen PMB 120/200-50
Suitable for rapid surfacing with coated bitumen macadam. Sufficiently liquid for instant adhesion to the rock surface where the pores have already been filled with bitumen; it is only necessary to use hot bitumen for adhesion to achieve a strong, elastic bond.
-
Read morePolymer bitumen PMB 65/105-65
Suitable for preparing asphalt mixtures for asphalting high-traffic objects. Includes SBS polymers, which raise the softening point and elastic recovery significantly, thus providing the best bonding characteristics in asphalt mixtures.
-
Read more
Polymer bitumen PMB 75/130-65
Suitable for preparing asphalt mixtures for asphalting high-traffic objects. Includes SBS polymers, which raise the softening point and elastic recovery significantly, thus providing the best bonding characteristics in asphalt mixtures.
-
Read morePolymer bitumenemulsion C60BP4
Suitable for hole repair, where bitumen requirements are higher, e.g. for avoiding bleeding or stronger but more elastic rock adhesion. The emulsion contains SBR polymers, which make such characteristics possible. Good for using on high-traffic roads and for city traffic with many intersections and slow traffic with many turns.
-
Read morePolymer bitumenemulsion C65BP4
Suitable for surface work where there are increased requirements for bitumen both to prevent sweating and to strengthen the stone more strongly and at the same time more resiliently on the road surface. The emulsion contains SBR polymers, which make such better properties possible. Good for use on busy roads and also in city traffic with many intersections and slow and heavy traffic.
-
Read more
Road bitumen 250/330
Suitable for surfacing sealing works on low-traffic roads, if the purpose immediate rock adhesion to bitumen. Use during sunny weather and over a +20 degree ambient temperature.